014-1060-030 - Follower plate for pumps with shank 30 mm subgroup-Drukvaten in AISI 304 of AISI 316 All the parts can be

All the parts can be substituted without opening those parts of the body that are in contact with the fluid

4 meter uitgifte slang en afgifte pistool

the transmission and the differential of motor vehicles on the lift bridge

De tank kan geleverd worden met een 12V of 24V motor

014-1060-030 - Follower plate for pumps with shank 30 mm subgroup-Drukvaten in AISI 304 of AISI 316 All the parts can beIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.